Gigavac MX11FA Contactor (48 Vdc Coil, 150+ Amps) FREE SAME DAY SHIPPING!

Description

MX11FA
Continuous Current 150A w/ 4AWG
Max Current—1 sec 1200A
Max Current—10 sec 750A
Max Current—90 sec 250A
Contact Voltage Drop (max) 150mV at 150A
Insulation Resistance (min) 100MΩ (50MΩ after life)
Dielectric Withstanding 1500VRMS (1050 VRMS after life)
Operate Time (max) 30 msec (include bounce)
Release Time (max) 12 msec
Weight 1.0 lb with hardware (460 grams)
150A at 24 VDC 200,000 cycles
Mechanical Life 300,000 cycles
Fault Interrupt @ 28VDC 1500A
Chassis level UL508 sized power terminals – No need for specially routed power cables, special bus bars, or special lugs.
Rugged EPIC Seal rated to 175°C – Reduced risk of fire or meltdown in over current conditions. The same technology used for advanced aerospace programs.
Hermetically Sealed – Designed to meet: UL1604 for Class I & II, Div 2 and Class III for use in hazardous locations, IP67 for temporary water immersion for 30 min, SAE J1171 - external ignition protection, and ISO8846 for protection against ignition around flammable gasses.
High Efficiency Dual DC Coils – Very low 12 or 24 VDC continuous coil power with no EMI emissions or cross-talk on your system control power. Ideal for battery powered systems or where low power is needed.
Built-in coil suppression for all DC coils – Saves you engineering time and parts cost to add external coil suppression.
Stainless steel hardware and mounting inserts, for years of corrosion free service.
UL508 ambient compliant to 75°C but can operate continuously at 85°C with a higher terminal temperature rise of 60°C. Can also operate up to 125°C in special cases - contact GIGAVAC for details.
Not position sensitive – can be mounted in any position for ease of installation.